Some attentions for induction heating equipment in daily production
The hot summer will coming soon, so need to pay more attentions on induction heating equipment maintenance.If you do not pay more attentions than before, there may be unexpected problems in summer.
Now Forever furnace company will share some induction heating equipment common sense about maintenance to avoid the problems
1.Daily maintenance
Equipment should be kept clean and dry, especially for high voltage porcelain insulation parts should always wipe the dust, because the dust of the components affected with damp, prone to climb or breakdown of the risk. Various water cooling components should be checked regularly to prevent leakage or blockage. In the 10 minutes after the filament of the oscillating tube is closed, the cooling water should continue to supply, so that the oscillation tube can be fully cooled. The function of each door switch is reliable,and the contact of the switch of the door switch is not allowed in the work, so that the switch has no protective effect.
2.Regular maintenance
Check whether the electrical connection screws are loose, and the contact is good. If the use of circulating water cooling water tank, the water should be regularly checked for the resistance is qualified, should not be replaced when. Check whether the function of the protection circuit is normal, such as the door switch, over current relay, etc.. Remove scale oscillation on the anode tube. To test the insulation resistance of each circuit, and the quality of the oil in the rectifier transformer. To strengthen the maintenance work, you can find the hidden trouble in time, reduce equipment failures, so the use of units should be based on specific circumstances, to develop equipment maintenance procedures.
In addition to the above two points, but also pay attention to:
The first is to check whether the surrounding work environment to meet the requirements of the overall air humidity of the data, we should have a spectrum of heart,so that can avoid the work of the accident occurred when the accident happened.
The second is that the operator must pay attention to the fire, which will cause a certain degree of impact on the device itself.
The last is the wiring parts should be checked regularly to see whether it has been aging will be damaged, and then some of the words to be replaced in a timely manner, or there will be an electric shock or explosion accident.
Please feel free to contact with us to get more information about the induction heating equipment.Our our website www.hy-inductionheating.com or email our email box :yuantuodianlu@163.com
Post time: 05-10-2016